[ENG] Combo PRO

The Combo PRO is the ultimate solution to get a full Cube environement in the most compact size possible. This version of the combo includes :
- Mini Carrier Board
- Mini PDB Pro version
- 4* Cube screws
- 10* 4mm nylon spacers
- Cube full cables Set
The Mini Carrier Board :
You can find all informations about the Mini Carrier Board on the dedicated page on the wiki or on the product page.
PRO Power Distribution Board (PDB)
This version of Airbot PDB includes :
- Power distribution over 12 pairs of pads (8 for ESC and 4 smaller for accessories)
- Dual 5V3  power supplies (max 3A continuous / 5A peaks tolerant)
- Current sensing (100A Max)
- Voltage sensing (12S Max)
Installation & Setup
Install the combo on a drone
The combo is very easy to integrate, you simply have to follow the holes pattern provided below, place the nylon spacers between the frame and the boards provide and install screw and nuts and you are good to go. (screws length will depends of your frame / thickness of support)
We provide different files and documents you can download for free in the Free Downloads section of our website. It includes .pdf file you can print (at 100% scale) to help you drilling mounting holes manually, a dxf file to allow CNC router users to get the outlines ready to cut and 3D files to allow drone manufacturers to integrate it in their UAV developments.
Setup parameters 
Use your favorite software to change the following parameters in your Cube, and get the sensors working. We recommand to use Mission Planner.
BATT_AMP_PERVLT : 45
BATT_VOLT_MULT : 16
​
TECHNICAL SPECIFICATIONS :
​

[ENG] Mini PDB

Next - Z-Cam E1 Interfaces

[ENG] AV Module

Last modified 5mo ago

Copy link

On this page

The Mini Carrier Board :

PRO Power Distribution Board (PDB)

Installation & Setup

Install the combo on a drone

Setup parameters

TECHNICAL SPECIFICATIONS :