V 1.0
The v1.0 has been released early 2022 with 100A capability. This set is replaced late 2023 by the v1.1 that bring the new PDBs versions. It is now available in 100A and 200A.
The Combo PRO is a great solution to get a full Cube environement in the most compact size possible. This version of the combo includes : - Mini Carrier Board - Mini PDB Pro 100A - 4* Cube screws - 10* 4mm nylon spacers - Cube full cables Set
The Mini Carrier Board :
You can find all informations about the Mini Carrier Board on the dedicated page on the wiki or on the product page.
PRO Power Distribution Board (PDB)
This version of Airbot PDB includes : - Power distribution over 12 pairs of pads (8 for ESC and 4 smaller for accessories) - Dual 5V3 power supplies (max 3A continuous / 5A peaks tolerant) - Current sensing (100A Max) - Voltage sensing (12S Max)
Installation & Setup
Install the combo on a drone
The combo is very easy to integrate, you simply have to follow the holes pattern provided below, place the nylon spacers between the frame and the boards provide and install screw and nuts and you are good to go. (screws length will depends of your frame / thickness of support) We provide different files and documents you can download for free in the Free Downloads section of our website. It includes .pdf file you can print (at 100% scale) to help you drilling mounting holes manually, a dxf file to allow CNC router users to get the outlines ready to cut and 3D files to allow drone manufacturers to integrate it in their UAV developments.
Setup parameters
Use your favorite software to change the following parameters in your Cube, and get the sensors working. We recommand to use Mission Planner.
TECHNICAL SPECIFICATIONS :
Last updated
